![]() Remember the actual fabric of the blind will be about 35mm narrower than the measurements you give us. When deciding on mounting inside or outside recess, ensure that there are no obtruding objects (window catches, electrical sockets, tiles etc.) to hinder the operation of the blind.įor an inside recess fit we deduct 35mm from the width measurement you provide us to ensure that the blind with the controls and brackets will fit the into the recess of your window. Therefore, hanging a blind outside of the recess usually causes no problem in terms of lost space, but fitting inside will make the blind nearer to the window. This internal space in a room is rarely used during the day, unless the sill of the window is put to some use. When a window is not flush to the wall, there is a recess which is created. This material can be wiped down which makes it suitable for bathrooms and kitchens. Our translucent blinds do let light through them and due to this feature the print will be slightly less vivid when the light hits through but you cannot see through the material. Our translucent fabric is printed using water based inks and has the feel of a finely textured canvas fabric similar to the ones used to create canvas photo prints. ![]() Moisture Resistance: Suitable for most conditionsĪnti Bacterial: Incorporates Biosafe® formula Material Composition: 4-ply 75% PVC, 25% Fibreglass This material can be wiped down which makes it suitable for bathrooms and kitchens This material contains Biosafe® which is the international standard of our proven antimicrobial formula that has been tested under the most stringent measures to ensure effective inhibiting of infection. This flame retardant fibreglass composition combines a PVC coating for easy clean which ensures this material is suitable for almost all applications. Our blackout material is designed for areas where a high level of light exclusion is required. To minimize light sneaking through we recommend that the blind overlaps the window recess by at least 7cm so add this to your measurement.įor example, if your measurement is 100cm wide, we will make the blind material to 100cm wide and then once the end fittings are applied the overall width will then be 103.5cm wide. ![]() Measure the full width and height of the recess and then add a little extra to the top and to each side, we will make the blind to the size you specify with no deductions. Don’t make any deductions, we’ll deduct from the width to ensure your blind fits perfectlyįor example, if your inside recess is 100cm wide, we will make the blind material to 96.5cm wide and then once the end fittings are applied the overall width will then be 100cm wide. Measure the width of the inside recess of the window at the top in cm and make a note of this measurement, do the same for the drop/height and enter these measurements in the order form above. Measure the full width and height of the recess and we will make the appropriate deductions to ensure a perfect fit
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |